- Unspecified fuel
- Retired
- 10 · 100 · 1,000 MW
Map
- Unspecified fuel
- Retired
District 100 Transco Gas Pipe Line: location. Basemap: Protomaps, © OpenStreetMap contributors, ODbL.
District 100 Transco Gas Pipe Line
Power plant · Other
Key facts
Power plant · Other Retired- Capacity
- Capacity: sourceEIA-860M · Open licenseMW
- Commissioned
- 1951
- Net generation, 2009
- 0 MWh
- Grid
- 115 kV to Alabama Power Co (SOCO)
- Location
- Chilton County, Alabama
- Operated by
- Transcontinental Gas PL
Operations
- Net generation, 2009
- 0
MWh - Fuel burned, 2009
- 0
MMBtu - Capacity factor, 2009
- Not stated
- Heat rate, 2009
- Not stated
| Year | Net generation (MWh) | Fuel burned (MMBtu) | Capacity factor | Heat rate (Btu/kWh) |
|---|---|---|---|---|
| 2009 | 0 | 0 | — | — |
| 2008 | 1,585 | 8,973 | 11.3% | 5,661 |
| 2007 | 108 | 22,507 | 0.8% | — |
| 2006 | 1,747 | 0 | 12.5% | — |
| 2005 | 2,143 | 0 | 15.3% | — |
| 2004 | 3 | 0 | 0.0% | — |
| 2002 | 4,185 | 138,895 | 29.9% | — |
| 2001 | 4,324 | 143,519 | 30.9% | — |
How these are worked out
Net generation and fuel burned are the monthly figures EIA publishes in its bulk electricity file, from the plant's Form 923 reports; a year is the sum of its months. Capacity factor is a full year's net generation over today's nameplate capacity times the hours in that year (8,784 in a leap year), so a plant uprated or partly retired since reads against its current size; heat rate is fuel burned over net generation, for plants that burn fuel. A year with fewer than twelve months stated has no capacity factor, and a value outside the plausible range is left blank rather than shown. By month, the charts apply the same rules to each month's own hours and fuel.