- Combustion
- Operating
- 10 · 100 · 1,000 MW
Map
- Combustion
- Operating
Tenaska Lindsay Hill Generating Station: location. Basemap: Protomaps, © OpenStreetMap contributors, ODbL.
Tenaska Lindsay Hill Generating Station
Power plant · Gas, combined cycle
Key facts
Power plant · Gas, combined cycleran 19% of 2025 Operating- Capacity
- Capacity: sourceEIA-860M · Open licenseMW
- Commissioned
- 2002
- Net generation, 2025
- 1,532,284 MWh
- Grid
- 500 kV to Alabama Power Co (SOCO)
- Location
- Autauga County, Alabama
- Operated by
- Alabama Power Co
Operations
- Net generation, 2025
- 1,532,284
MWh - Fuel burned, 2025
- 11,475,089
MMBtu - Capacity factor, 2025
- 18.6
% - Heat rate, 2025
- 7,489
Btu/kWh
| Year | Net generation (MWh) | Fuel burned (MMBtu) | Capacity factor | Heat rate (Btu/kWh) |
|---|---|---|---|---|
| 2026 (8 of 12 months) | 735,983 | 5,715,341 | — | 7,766 |
| 2025 | 1,532,284 | 11,475,089 | 18.6% | 7,489 |
| 2024 | 1,752,217 | 12,892,193 | 21.2% | 7,358 |
| 2023 | 2,712,170 | 18,979,439 | 33.0% | 6,998 |
| 2022 | 3,013,188 | 21,162,667 | 36.6% | 7,023 |
| 2021 | 1,887,341 | 14,271,892 | 22.9% | 7,562 |
| 2020 | 1,825,393 | 13,958,992 | 22.1% | 7,647 |
| 2019 | 1,723,985 | 12,903,494 | 20.9% | 7,485 |
| 2018 | 1,882,859 | 14,027,394 | 22.9% | 7,450 |
| 2017 | 1,112,559 | 8,204,611 | 13.5% | 7,374 |
| 2016 | 2,905,517 | 20,892,146 | 35.2% | 7,190 |
| 2015 | 4,218,851 | 30,439,825 | 51.3% | 7,215 |
| 2014 | 3,035,953 | 22,797,229 | 36.9% | 7,509 |
| 2013 | 3,203,739 | 22,852,184 | 38.9% | 7,133 |
| 2012 | 2,937,788 | 20,719,192 | 35.6% | 7,053 |
| 2011 | 1,655,260 | 12,041,777 | 20.1% | 7,275 |
| 2010 | 910,925 | 6,668,965 | 11.1% | 7,321 |
| 2009 | 606,590 | 4,420,706 | 7.4% | 7,288 |
| 2008 | 608,679 | 4,541,086 | 7.4% | 7,461 |
| 2007 | 908,517 | 6,720,343 | 11.0% | 7,397 |
| 2006 | 980,562 | 7,637,983 | 11.9% | 7,789 |
| 2005 | 573,906 | 4,247,810 | 7.0% | 7,402 |
| 2004 | 701,026 | 5,222,380 | 8.5% | 7,450 |
| 2003 (11 of 12 months) | 173,896 | 1,471,981 | — | 8,465 |
| 2002 (8 of 12 months) | 1,325,010 | 9,851,412 | — | 7,435 |
How these are worked out
Net generation and fuel burned are the monthly figures EIA publishes in its bulk electricity file, from the plant's Form 923 reports; a year is the sum of its months. Capacity factor is a full year's net generation over today's nameplate capacity times the hours in that year (8,784 in a leap year), so a plant uprated or partly retired since reads against its current size; heat rate is fuel burned over net generation, for plants that burn fuel. A year with fewer than twelve months stated has no capacity factor, and a value outside the plausible range is left blank rather than shown. By month, the charts apply the same rules to each month's own hours and fuel.
Sources
3 sourcesSources
- EIA-860M
- GEMGlobal Integrated Power Tracker, Global Energy Monitor, September 2026 release (https://globalenergymonitor.org/projects/global-integrated-power-tracker), CC BY 4.0. Modified by Inframation: TransitionZero-sourced rows removed; statuses and technologies mapped to Inframation's vocabulary; figures aggregated. Copyright © Global Energy Monitor. Global Integrated Power Tracker, September 2026 release. Distributed under a Creative Commons Attribution 4.0 International License.
- EIASource: U.S. Energy Information Administration, Electricity bulk data (Form EIA-923 monthly plant series)